After joining legal force recent changes in the legislation of the Russian Federation, almost without exception, companies and private entrepreneurs of the Russian Federation must work with cash registers.
Today, the market for this equipment offers entrepreneurs a considerable assortment of goods. For this reason, legal entities a reasonable question arises - which company’s equipment is better to purchase.
The most popular technique is the "Barcode-M".
Cash register equipment of the brand "Barcode-M" uses very popular among domestic companies and private entrepreneurs who, due to amendments to Federal Law No. 54, are forced to use in the process of labor activity CCP.
The cash equipment of the brand in question is fully capable of providing not only a record, but also storage of all the necessary information in special drives for the purpose of their further transmission through the fiscal operator of reports to the territorial representative office of the tax authority at their place of work.
The equipment of the brand in question is listed in the Register cash registers, which is allowed for use on the territory of the Russian Federation.
This kind of technique can be used even in isolated places that fully meet the criteriaput forward federal bodies executive power.
Step-by-step application
In the event that a company or private entrepreneur uses the cash register “Barcode-M” of the old model, then the connection process is carried out using COM port.
The sequence of actions is to next:
Ultimately, you need to click on the “Finish” and “ok” keys. Based on this, the application will restart, which means complete completion of the settings.
Views
The company "Barcode-M" is engaged in the production of various types of cash registers.
Let's consider each of them in more detail.
Cash register includes:
- RS-232;
- built-in not only GPRS, but also a Wi-Fi module;
- USB host.
This type of KKT works with a USB flash drive.
Power is provided by the built-in rechargeable battery with a nominal voltage of 7.4 V, having a nominal capacity of 1.4 A / h with additional recharging using an adapter.
It is worth noting that the number of checks that can be printed without recharging is about 500.
Barcode-Light-FR-K
Reasonably considered cash registers from the budget series. Carries out work on a check tape with a width of 57 millimeters. Type of device connection - RS / USB.
Great for those entrepreneurs who have a low or medium load.
The prime cost varies from 25 to 27 thousand rubles.
It rightfully refers to a fairly serious cash register equipment that works on a check tape with a width of about 80 millimeters. A distinctive feature is the more wear-resistant thermal head.
Can work with connection types such as RS or USB.
Depending on where exactly this equipment will be purchased, the cost can vary from 27,000 to 30,000 rubles.
Barcode FR-K
According to reviews already by those who work with this kind of technology, we can say that it is quite a sturdy device, characterized by increased reliability. On it carry out their business activities most of the famous Magnit chain store.
The work is carried out on a check tape with a width of 57 millimeters. The device can be connected at the choice of the entrepreneur using RS or USB.
The price of such a device can reach 35,000 rubles, depending on where it is purchased.
Cash register equipment of the type “Barcode-01F” is intended for use by companies and private entrepreneurs only if there is an appropriate fiscal drive in the case.
The type of equipment under consideration may without too much difficulty be used in areas separated from communication networks, and only in those that clearly meet the criteria established by federal authorities.
Barcode M-01F
Considered most popular model fiscal registrar, which has the function of transmitting information to the territorial representation of the tax authority, as well as automatic tape cutting.
Work is carried out on a check tape with a thickness of 80 millimeters.
The printing method is direct thermal printing.
Bar-Mini-02F (Bar-Mini-PTK)
The software package of this model of CCP refers to latest generation registrar. The device is based on a Japanese thermal printer.
In fact, it is considered a modern software and hardware complex, which relatively recently came to replace the "Barcode-Mini-02F." A distinctive feature is elevated level performance and stylish design. Moreover, today it is considered the most reliable model, the operation period of which over 10 years.
It is important to remember that this particular model can print a QR code.
Cost
As indicated above, a variety of cash registers has different cost. The main factors that affect such devices are considered:
- kind of model;
- operating modes;
- connection types
- the place where the device is purchased and so on.
The company "Shtrikh-M" offers domestic entrepreneurs to purchase products of the same name at cost from 23,000 to 35,000 rubleswhich, at the same time, will have all the necessary functions for the smooth transfer of information to the tax authority.
How to configure the CCP, you can learn from this video.
Cash register operation is possible in five modes:
1. Registration
2. reports without cancellation (X-reports),
3. reports with cancellation (Z-reports),
4. programming (D),
5. tax inspector (NI).
The cash register is turned on by briefly pressing the key RE. When you turn on the cash register goes into mode "CHOICE". Switch off by pressing and holding the key RE within a few seconds.
To exit any of the modes, press the key RE.
ATTENTION!
If, when the cash register is turned on, the indicator displays the date in the format DD-MM-GG, it must be checked and entered in the same format (see clause 1.7.1).
1. Registration.
To enter the registration mode, press the key "1". Upon successful completion, the indicator will display - "0.00".
1.1 Regular registration. Collect the amount of goods, press the key "Enter". If it is necessary to break through several products in one check, this operation must be repeated as many times as necessary. The check is completed by pressing the key "Total".
1.2 When working with several sections (departments), you need to collect the amount of goods, press the section key from 1 to 7 (key "Input" - 1stsection ). If it is necessary to break through several products in one check, this operation must be repeated as many times as necessary. The check is completed by pressing the key "Total".
1.3 To break through a check with change, it is necessary to perform the steps specified in paragraphs 1.1 and 1.2, but until the key is pressed "Total" you need to press the subtotal key "PS"(the entire amount of the check will be displayed on the indicator). Next, enter the amount received from the client (it must be at least the amount of the check) and press the key "Total". The change value will be highlighted on the indicator and check.
1.4 To break through a check with multiplying the amount of goods by quantity, you need to dial the amount of goods, press the multiply key Xenter the quantity of goods, press the separator point key «.»
and key "Enter".The check is completed by pressing the key "Total".
1.5 Error correction.
1.5.1 If before pressing the key "Enter"the amount of goods entered is incorrect; it can be canceled by pressing the reset key "WITH" or "RE".
1.5.2 If the key is pressed Entryincorrectly entered product amount is canceled by pressing the key "VZ".
1.5.3 To cancel an individual sale in a receipt after pressing a key Entrypress the key AN (on the indicator - "0.00"), dial the amount of the product to be canceled, press the key "Enter"sections 1 to 7 and the key "Total".
1.5.4 To return a check, you must enter the mode "Return of sale"sequential keystrokes "2" and "VZ". Next, enter the amount of goods to be returned, press the key "Enter" and "Total".
1.6 Reporting.
1.6.1 To remove a report without cancellation (X-report) it is necessary from the mode "CHOICE" press the key sequentially "2" and "1". A report will be printed on the receipt without cancellation.
1.6.2 To withdraw a report with cancellation (Z report) is necessary from the mode "CHOICE" "3" and "2". The first part of the report will be printed on the receiptc cancellation. A message will be displayed on the indicator. S-00. It is necessary to check the value "Changeable Outcome",printed in the 1st part of the report with cancellation and compare with the value of the shift revenue. If the amounts match, press the cancellation confirmation key - "00".A report will be printed on the checkwith cancellation.
Otherwise, cancel the blanking by pressing the reset key - "WITH" and check sales in shift. After checking, repeat the above steps.
1.7 Change date and time.
1.7.1 To translate a date, it is necessary from the mode "CHOICE" press keys sequentially “3”, “2” and “3”, the indicator will display the date in the format "DD-MM-GG." Enter the date in the same format, press the key "Total".A message will be displayed on the indicator. S-00. Press the confirmation key - "00"or refuse to enter the date by pressing the reset key– "WITH".
1.7.2 To transfer time, you need from the mode "CHOICE"press keys sequentially "7" and "Total". The indicator will display the current time in the format ChCh-MM. You must enter the time in the same format and press the key "Total".
ATTENTION!
Changing the date and time is possible only after the withdrawal of the report with cancellation.
1.8 Cash register programming.
The programming mode is designed to change the settings of the cash register and is available to an employee of the service center.
1.9 Tax Inspector Mode.
The tax inspector mode is required to enter information when registering a cash register at the IFTS and removing all kinds of fiscal reports. The mode is password protected by the tax inspector.
ATTENTION!
If you mistakenly enter NI mode, the cash register is blocked until the tax inspector password is entered correctly.
ClickRE for inclusion.
CHECK TIME AND DATE !!!
Display: "SELECT".
Press 7, the current time is displayed, press 1 -
on the date.
Entering time on the Bar-mini-K
Display: "SELECT".
Press 7, the display shows the current time, if true, press PE
and if it’s not right, press TOTAL, on the display 00-00-00,
enter the correct time and press TOTAL, RE.
Enter Date Bar-Mini-K
Display: "SELECT".
3, on the display 1-5, press 3, on the display DD-MM-GG,
enter the date and press TOTAL,
KKM SALES REGISTRATION Bar-mini-K
Display: "SELECT".
Press 1, (1, TOTAL), on the display: »0.00 ″.
Collect the amount (1.11), press ENTER, TOTAL.
KKM REPORTS Bar-mini-K
Display: "SELECT".
2, on the display 1-7, press 1 (X-report), printing is in progress.
Display: "SELECT".
3, on the display 1-5, press 2 (Z-report), printing is in progress,
on the display: "С-00", press 00.
*****
Barcode Mini-K
Operator memo.
1. Preparation for work.
- Turning on / off the KKM is performed using the "RE" key. To turn on, a short press on “RE” is enough, and to turn off, press and hold the “RE” button for 2 seconds.
- Turning on the KKM, the display will read: SELECT MODE.
- Press the key “1”, the display will show: REGISTRATION
0.00
KKM is prepared for registration of purchases.
2. Registration of purchases.
2.1. Registration of purchases at a fixed price: type the price of the goods on the keyboard, press the key "ENTER" and key "TOTAL" , KKM prints a check.
2.2. Registration of several purchases within one check: type on the keyboard the price of the first product, press the key "ENTER", type the price of the second product, press the key "ENTER" etc. At the end, press the key "TOTAL" , KKM prints a check.
2.3. Registration of purchases with multiplication of the quantity of goods by the price: type the quantity of goods on the keyboard, press the "o" key, press the "X" key, type the price of the goods on the keyboard, press the key "ENTER" and key "TOTAL" , KKM prints a check.
2.4. If KKM works for several sections, then the cost of the goods is entered and the key with the No. corresponding to the No. of the section into which the given product is punched is pressed, then the key is pressed "TOTAL", KKM prints a check.
2.5. Registration of purchases with the calculation of change: enter the price of the goods, press the key "ENTER", enter the amount that the buyer gave and press the key "TOTAL". The amount of change with a minus sign will be displayed on the screen, and on the check all calculations will be indicated, including the amount of change.
3. Bug fixes.
3.1. If the purchase amount is incorrect, but the keys are not pressed "ENTER" and "TOTAL" , then you need to press the "C" key, the erroneously collected amount will be reset.
3.2. If the purchase amount is incorrect, the key is pressed "ENTER"but no key is pressed "TOTAL" , then to correct the error, press "ВЗ", the check will be canceled.
3.3 If within one check it is required to cancel any of the purchases, it is necessary to press the "AH" button, - 0.00 will appear on the indicator. Enter the amount of the purchase to be canceled, enter the No. of the section into which the purchase was made, and press the key "TOTAL". KKM prints a receipt indicating the cancellation of the sale.
4. Reports
4.1. Report without blanking or X-report.
Entering the X-report mode is carried out from the menu “MODE SELECTION”.To do this, press the "2" key. A message appears on the indicator: "REPORT WITHOUT REPAIR."
For cash register withdrawal , you must press the key "1".
4.2. Daily report with cancellation orZ-report.
Entering the Z-report mode is carried out from the menu “MODE SELECTION”.To do this, press the "3" key. A message appears on the indicator: “REPAIR WITH EXTINGUISHMENT”.
To removez-reportyou must press the "2" key.
Cash Register "Barcode Mini K" (version 01) is a convenient cash register, which is perfect individual entrepreneurs and small businesses operating in the field of trade and services. This device is very easy to operate and maintain, therefore, to work with this unit, the cashier will not need to relearn.
Distinctive features of cash registers "Barcode Mini-K":
· Universality - KKM "Barcode Mini K" can be used in the service sector, as well as wholesale and retail;
· High speed of the printing device;
· Silent work;
· The presence of the necessary connectors for connecting various peripheral devices (electronic scales, memory expanders, barcode scanner, etc.);
· The possibility of autonomous operation when the main power source is disconnected;
· Ability to work with different ways payment;
· Compact sizes, ergonomic design.
Technical characteristics of KKM "Shtrikh-Mini-K":
Printing device:CITIZEN MLT-288.
Cashier Indication:
Customer Indication:single line 10-bit seven-segment LCD.
Keyboard: push-button, 33 keys.
Operating temperature range:from +10 ° С to +40 ° С.
Print Speed, p./sec:ne less than 8.
Number of sections:30.
Number of cashiers:8.
Ezine capacity:8000 sales.
Number of replaceable records in the FP:2000.
Nutrition:from a built-in rechargeable battery with a nominal voltage of 6 V and a capacity of 1.3 A h through a mains adapter or through a built-in power supply unit from an alternating current main of 130/270 V.
Overall dimensions, mm:320 x 226 x 92.
Weight kg:1,7.
Purchase cash registers « Barcode Mini K ”you can in the Techno M online store. In our store it is presented from the best domestic manufacturers, which you can buy at competitive prices. We not only sell KKM, but also ensure its delivery in Moscow.
Brief user manual
Press PE to turn on.
CHECK TIME AND DATE !!!
Display: "SELECT".
Press 7, the current time is displayed, press 1 -
on the date.
Passwords of operators (1, etc.) and administrators (7 and 8)
missing in new versions.
Entering time.
Display: "SELECT".
Press 7, the display shows the current time, if true, press PE
and if it’s not right, press TOTAL, on the display 00-00-00,
enter the correct time and press TOTAL, RE.
Enter date.
Display: "SELECT".
3, on the display 1-5, press 3, on the display DD-MM-GG,
enter the date and press TOTAL,
FISCALIZATION.
Display: "SELECT".
Press TOTAL, on the display: “F1-6“.
Press 2 for fiscalization, on the display: “RNM”,
enter the number (up to 10 digits), press TOTAL,
on the display: “TIN”, enter the number, press TOTAL,
on the display: “PAIR”, enter the password (up to 8 digits), press TOTAL,
on the display: "С-00".
Check the printout for the correctness of the entered data.
If everything is correct, press "00".
There is fiscalization and activation of ECLZ.
Cumulative total for the last registration
Table 2, row 1, field 13 - set 2.
REGISTRATION OF SALES.
Display: "SELECT".
Press 1,1, TOTAL, on the display: »0.00 ″.
Collect the amount (1.11), press ENTER, TOTAL.
REPORTS
Display: "SELECT".
2, on the display 1-7, press 1 (X-report), printing is in progress.
Display: "SELECT".
3, on the display 1-5, press 2 (Z-report), printing is in progress,
on the display: "С-00", press 00.
FISCAL REPORTS.
Display: "SELECT".
Press 5, X, on the display: “NAL. INSP / N_ _ _ _ _ ".
Enter the password, press TOTAL, on the display: "F1-6".
Press 4 (full report by dates), on the display: “ДН”,
enter the start date, press TOTAL,
on the display: “TO”, enter the start date, press TOTAL,
report is printing.
Activation.
Display: "SELECT".
Press 6,
on the display: "E1-9", press 9 to activate,
a printout of the activation check is in progress.
Error 024 - Initialization is prohibited * (initialization is prohibited until the micro button on the board is pressed).
—————————————-
Closing the archive.
Display: "SELECT".
Press 6,
on the display: "E1-9",
press and hold the micro button on the board
and sequentially press the keys: 00, X, 00.
Printing in progress: “ARCHIVE IS CLOSED”
——————————————-
If you have problems:
Unmark archived archive (in FP):
1. enter the technological mode, press and hold the micro button on the board and turn on the cash register
2. Press Enter
3. release the micro button, press TOTAL and wait for the operation to complete and exit to techno mode
4. “successful completion” is printed on the check
——————————————————
EECL reports.
Display: "SELECT".
Press 6,
on the display: "E1-9",
3 - report on dates of closed shifts
(on the display? H - enter the start date and TOTAL, on the display? O - enter the end date and TOTAL,
4 - report on the numbers of closed shifts
(on the CH display - enter the start date and TOTAL, on the CO display - enter the end date and TOTAL,
on display 0-1, press 1 for a brief report and TOTAL)
5 - the result of the shift by shift number.
6 - the result of activation.
7 - by the number of the PDA.
8 - control by shift number.
CONTROL TAPE
(Selection), 6,
on the display E 1-9, press 8,
on the HC display, enter the shift number, then TOTAL.
Is printed control tape selected shift.
PROGRAMMING
on the display: "SELECTION", 4,
OK,% - - tables,
OT,% + - rows,
VZ, AN - fields,
PS - print.
CODE - print a character table.
AUTO COLLECTION
Table 2, row 1, field 16, TOTAL.
(default 0, set 1),
TOTAL.
LOAN SALES
Table 2, row 1, field 23, TOTAL.
(default 2, set 1),
TOTAL.
FULL Z-REPORT
Table 2, row 1, field 25, TOTAL.
(default 0, set 1),
TOTAL.
CLICHE
Cliche (TRADE OBJECT №1) -
table 6, row 5 (1st row), field 1.
Next, the TOTAL, then the code of the symbol, TOTAL, etc.
The line contains 24 characters * (table AMC-100K).
* In new versions 32 characters.
PRODUCTS
Entering programming mode:
on the display: "SELECTION", 4,
Table Navigation Keys:
OK,% - - tables,
OT,% + - rows,
VZ, AN - fields,
Tab. 1, row (1-1000), field 1, TOTAL,
enter the price of the product, press TOTAL.
Only registered customers who bought this product can post reviews.